Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Shimokawabe, Takashi*; Aoki, Takayuki*
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 27, 4 Pages, 2022/06
We have developed a wind simulation code named CityLBM to realize wind digital twins. Mesoscale wind conditions are given as boundary conditions in CityLBM by using a nudging data assimilation method. It is found that conventional approaches with constant nudging coefficients fail to reproduce turbulent intensity in long time simulations, where atmospheric stability conditions change significantly. We propose a dynamic parameter optimization method for the nudging coefficient based on a particle filter. CityLBM was validated against plume dispersion experiments in the complex urban environment of Oklahoma City. The nudging coefficient was updated to reduce the error of the turbulent intensity between the simulation and the observation, and the atmospheric boundary layer was reproduced throughout the day.
Takahashi, Tomoyuki*; Uchida, Shigeo*; Takeda, Seiji; Nakai, Kunihiro*
KURNS-EKR-11, p.97 - 102, 2021/03
This paper outlines the status of IAEA database compilation for migration parameters depending elements in a biosphere such as soil-to-plant transfer factor and bioconcentration factor of marine products, and the status of utilization of the database in dose evaluation of radioactive waste disposal in Japan. Additionally, in the case of applying a new database to the dose evaluation for future radioactive waste disposal in a specific area. We summarized the opinions of specialists and result of general discussion about future strategies to make a new database for their parameters, perspectives to be considered in it, issues, etc.
Suzudo, Tomoaki; Takamizawa, Hisashi; Nishiyama, Yutaka; Caro, A.*; Toyama, Takeshi*; Nagai, Yasuyoshi*
Journal of Nuclear Materials, 540, p.152306_1 - 152306_10, 2020/11
Times Cited Count:9 Percentile:75.92(Materials Science, Multidisciplinary)Spinodal decomposition in thermally aged Fe-Cr alloys leads to significant hardening, which is the direct cause of the so-called 475C-embrittlement. To illustrate how spinodal decomposition induces hardening by atomistic interactions, we conducted a series of numerical simulations as well as reference experiments. The numerical results indicated that the hardness scales linearly with the short-range order (SRO) parameter, while the experimental result reproduced this relationship within statistical error. Both seemingly suggest that neighboring Cr-Cr atomic pairs essentially cause hardening, because SRO is by definition uniquely dependent on the appearance probability of such pairs. A further numerical investigation supported this notion, as it suggests that the dominant cause of hardening is the pinning effect of dislocations passing over such Cr-Cr pairs.
Kato, Tomoko; Fukaya, Yukiko*; Sugiyama, Takeshi*; Nakai, Kunihiro*; Oda, Chie; Oi, Takao
JAEA-Data/Code 2019-002, 162 Pages, 2019/03
The radioactive waste generated from Fukushima Daiichi nuclear power station (FDNPS) accident have features such as wide range of radioactivity level (from low to high) and huge amount etc. It would be necessary for the waste from the FDNPS accident to develop suitable disposal concept and to be disposed safely and reasonably. When considering such appropriate disposal concepts in site-generic phase, it is necessary to appropriately develop models and parameters depending on the disposal concepts, such as disposal depth and specification of engineered barrier. In addition, it is desirable to evaluate the safety of repository with common models and parameters independent on the disposal concepts. In the safety assessment of disposal, it is useful to show the difference in performance of repository with "dose" as an indicator of safety assessment. Biosphere model and parameter set and flux-to-dose conversion factors calculated using them are originally dependent on the disposal concepts. However, the biosphere models and the parameter set in safety assessment of near-surface disposal, sub-surface disposal and geological disposal are prepared in each case, and are different according to the age and purpose of the discussion. In this study, an example of biosphere model and parameter-set of groundwater sceinario commonly applicable to various disposal concepts were shown, to calculate flux-to-dose conversion factors, as common indicators independent to disposal concept. And, a set of flux-to-dose conversion factors was also calculated by using the commonly available biosphere model and parameter set. By applying the flux-to-dose conversion factors, it is possible to compare the performance of disposal concepts to the waste generated from FDNPS accident, focusing on the parts depending on the disposal concepts.
Mezawa, Tetsuya; Mochizuki, Akihito; Miyakawa, Kazuya; Sasamoto, Hiroshi
JAEA-Data/Code 2018-001, 55 Pages, 2018/03
Japan Atomic Energy Agency has been conducting "geoscientific study" and "research and development on geological disposal" in the Horonobe Underground Research Laboratory (URL) for safe geological disposal of high-level radioactive waste. Geochemical parameters of groundwater pressure, pH, and oxidation-reduction potential in the deep groundwater has been continuously monitored with monitoring systems which were developed in the Horonobe URL Project. This report presents the physico-chemical parameters of groundwater which have been obtained by the monitoring systems installed at the 140 m, 250 m and 350 m gallery. The data obtained until March 31, 2017 was summarized along with related information such as the specifications of boreholes and the excavation of the URL.
Tsuchiya, Harufumi; Harada, Hideo; Koizumi, Mitsuo; Kitatani, Fumito; Takamine, Jun; Kureta, Masatoshi; Iimura, Hideki; Kimura, Atsushi; Becker, B.*; Kopecky, S.*; et al.
Nuclear Instruments and Methods in Physics Research A, 767, p.364 - 371, 2014/12
Times Cited Count:10 Percentile:60.98(Instruments & Instrumentation)The impact of systematic effects on the areal density derived from a neutron resonance transmission analysis (NRTA) is investigated by measurements at the time-of-flight facility GELINA. The experiments were carried out at a 25 m station using metallic natural Cu discs with different thicknesses. To derive the areal density from a fit to the experimental transmission, the resonance shape analysis code REFIT was used. Large bias effects were observed using recommended resonance parameters. Therefore, neutron resonance parameters, in particular resonance energies and neutron widths, were derived from the transmission data obtained with a 0.25 mm thick Cu metallic sample. These parameters were used to study the impact of the resonance strength and sample thickness, on the accuracy of the areal density derived by NRTA.
Matsukawa, Makoto; Tamai, Hiroshi; Fujita, Takaaki; Kizu, Kaname; Sakurai, Shinji; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; Ando, Toshinari; Miura, Yushi
IEEE Transactions on Applied Superconductivity, 16(2), p.914 - 917, 2006/06
Times Cited Count:4 Percentile:29.26(Engineering, Electrical & Electronic)no abstracts in English
Yamaguchi, Tetsuji; Minase, Naofumi; Iida, Yoshihisa; Tanaka, Tadao; Nakayama, Shinichi
JAERI-Conf 2005-007, p.150 - 155, 2005/08
no abstracts in English
Kanno, Mitsuhiro*; Takeda, Seiji; Minase, Naofumi; Kato, Hideo; Kimura, Hideo
JAERI-Conf 2004-011, p.131 - 132, 2004/07
no abstracts in English
Takeda, Seiji; Minase, Naofumi; Kimura, Hideo
JAERI-Conf 2004-011, p.133 - 134, 2004/07
no abstracts in English
Maekawa, Masaki; Kawasuso, Atsuo; Yoshikawa, Masahito; Ichimiya, Ayahiko
Materials Science Forum, 457-460(Part2), p.1301 - 1304, 2004/06
no abstracts in English
Maekawa, Masaki; Kawasuso, Atsuo; Yoshikawa, Masahito; Ichimiya, Ayahiko
Materials Science Forum, 445-446, p.144 - 146, 2004/05
no abstracts in English
Hori, Toshihiko*; Chishiro, Etsuji; Yamazaki, Masayoshi*; Suzuki, Hiroyuki*; Hasegawa, Kazuo
KEK Proceedings 2003-16 (CD-ROM), 4 Pages, 2004/02
no abstracts in English
Tanaka, Tadao; Mukai, Masayuki; Munakata, Masahiro; Maeda, Toshikatsu; Ogawa, Hiromichi; Wang, Z.*; Li, S.*; Yang, Y.*; Zhao, Y.*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 2(3), p.350 - 360, 2003/09
Migration data of Sr,Np and Pu in natural aquifer were collected by a field test, which was performed in an aquifer at 30 m under ground surface of the field test site. Migration parameters for analysis of the results obtained the field test were measured by laboratory column tests and batch tests. Diffusion coefficient corresponding to water velocity was determined from the relationship between water velocity and diffusion length, which obtained from the column tests. Distribution coefficient was determined by considering confident ability of data, test conditions, and environmental conditions. One dimensional migration behavior of the radionuclides in aquifer, calculated by using the migration parameters obtained from the batch and column tests, agreed with the results obtained from the field test. It was confirmed that the migration behavior of alpha-nuclides could be evaluated by applying the conventional equation for evaluating the radionuclide migration and the migration parameters obtained from laboratory tests.
Ishikawa, Nobuyuki; Abe, Kenichi*
Denki Gakkai Rombunshi, C, 123(2), p.317 - 323, 2003/02
This paper presents a method of designing a feedforward element of 2DOF controller based on the approximation in time domain. Since we deal with the discrete-time 2DOF controller parameterized with rational stable function, the relation of the controller parameter and output sequence is expressed in the form of simple linear equation, through which the feedforward element of 2DOF controller can be designed. In addition, we also propose a controller parameter tuning method to enhance the reference response characteristics of control system by applying the iterative solution commonly utilized in numerical calculation. The results of the numerical simulation show the effectiveness of the proposed methods.
Sakai, Akihiro; Okoshi, Minoru
Radiation Risk Assessment Workshop Proceedings, p.175 - 186, 2003/00
To establish the clearance levels, the Nuclear Safety Commission (NSC) has been discussing the clearance levels since May 1997. The NSC derived the unconditional clearance levels for the solid materials, namely concrete and metal, arising from the operation and dismantling of nuclear reactors and post irradiation examination (PIE) facilities. Two destinations of the cleared materials, namely disposal and recycle/reuse, were considered. Deterministic calculation models were established to assess individual doses resulting from 73 exposure pathways, and realistic parameter values were selected considering the Japanese natural and social conditions. The clearance levels for 21 radionuclides of nuclear reactors and for 49 of PIE facilities were derived as radioactivity concentration equivalent to the individual doses of 10 Sv/y. Most of calculated clearance levels were nearly the same as those shown in IAEA-TECDOC-855. Some, however, were different. It is considered that the major reasons depend on differences of fixed scenarios and of selected values of parameters.
Nakagawa, Tsuneo; Iwamoto, Osamu; Hasegawa, Akira
JAERI-Research 2002-035, 94 Pages, 2002/12
no abstracts in English
Takeda, Seiji; Kanno, Mitsuhiro; Minase, Naofumi; Kimura, Hideo
Journal of Nuclear Science and Technology, 39(8), p.929 - 937, 2002/08
no abstracts in English
Ebisawa, Katsumi; Kuno, Tetsuya; Shibata, Katsuyuki; Oi, Masahiro*; Horiuchi, Shigeki*; Abe, Ichiro*; Tsuzuki, Kazuhisa*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 1(2), p.177 - 190, 2002/06
no abstracts in English
Nakagawa, Tsuneo; Iwamoto, Osamu; Hasegawa, Akira
JAERI-Research 2001-059, 84 Pages, 2002/01
no abstracts in English